Haug High Voltage Power Supply, Haug Multistat Power Supply, Haug EN 92 EX Power Supply, Haug S Line Power Supply
High Voltage Power Supply EN-C (Two Outlet) EN-C4 (4 Outlet)
Static control power supply EN-C type High Voltage Power Pack. The integrated high voltage converts applied mains voltage to approx. 7000 to 8000 volts. The unit is equipped with two or four high voltage terminals and integration On/Off pilot lamp.
Power supplies are equipped with a modular type high voltage transformer. It consists of three main modules, all of which can be replace individually. The unit is electrically approvedfor North American instalations.
S Line Power Supply EN SL
The S Line power supply comes with two high voltage connections and meets both North American and European standards. The integrated high voltage power supply converts applied mains voltage to approx. 7000 to 8000 volts. Integration On/Off pilot lamp.
The S Line power supply EN SL LC is the same as the EN SL but with integrated full electronic function monitoring to constantly monitor all functions of the ionizing system. It alerts the operator of an irregularities by causing the LED indicator integrated in the housing to flash.
The S Line EN RLC is identicalin all aspects to the EN SL LC plus a signal socket above the earthing sleeve. A fault message can be connected to the signal socket.
Multistat Power Supply
The Multistat power pack in combination with HAUG ionizing units is intended for the removal of electrostatic charges. The mains voltage is transformed by the Multistat to an output voltage of 7–8 kV~ for the operation of HAUG ionizing units.
EN 92 EX Power Supply
The EN 92 EX power supply is suitable for direct use in areas with potentially explosive atmospheres (zones 1 or 2).
The units comply with the international standard ATEX directives. All high voltage components are accomodated in a flameproof housing. The EN 92 EX power supply is equipped with two high voltage ports for the connection of the ionizing units. No long high voltage cables are required, as the power supply can be installed in the imediate vicinity of the ionizing unit.
